MSI-HPH EXd High Pressure Housing (HPH)
The high-pressure housing meets the requirements for use in potentially explosive areas with MSI position sensors. This housing is designed for sensors of the MSI-H and MSI-HE series and can be used with cable or connector versions. Several construction combinations are available, with top or side mounting. Measuring length from 25 to 5800 mm, adjustable in 1 mm increments.
Price on request
Design features
- Explosion protection marking: 0/1 Ex db IIC T5 Ga/Gb X, Ex ta IIIC T100 °C Da X
- Modular design allows for quick equipment repair without the need to relieve pressure from the hydraulic circuit.
- Designed for sensors of the MSI-H and MSI-HE series and can be used with cable or connector versions.
- Several construction combinations are available: M18 or ¾” UNF mounting flange; M20 or ½” NPT cable gland thread; long or short housing, top or side mounting.
- Measured length from 25 to 5800 mm, adjustable in 1 mm increments.
- Operating temperature up to 75 °C.
- Optional operating pressure up to 530 bar.
- Ingress protection IP68 (with cable outlet).
Compatibility
Compatible MSI sensor series | Interface | |||||
Analog | Start/Stop | SSI | CAN | Profibus | DeviceNet | |
Configurator
MSI-HPH
.
_
.
_
.
A
MSI-HPH EXd High Pressure Housing (HPH), order code:
Scope of delivery
THE SCOPE OF SUPPLY INCLUDES: | |
MSI-HPH EXd Housing | |
Certificate of Conformity (Safety of equipment intended for use in potentially explosive atmospheres, TR CU 012/2011) | |
Documentation (Data sheet) | |
Sensor must be ordered separately! | |
Product ordering code
TECHNICAL REQUIREMENTS FOR ORDER PLACEMENT | ||||||||||
1 | 2 | 3 | 4 | |||||||
MSI-HPH | . | 0900 | . | 0 | 5 | 0 | 0 | . | A | |
1 | Series: MSI-HPH - high-pressure housing | |||||||||
2 | Type of design: | |||||||||
0100 | 0600 | 0900 | 1000 | 1300 | ||||||
![]() | ![]() | ![]() | ![]() | ![]() | ||||||
M18 mounting thread, with M20 end access | 3/4″ UNF mounting thread, with M20 end access | M18 mounting thread, with M20 side access | 3/4″ UNF mounting thread, with M20 side access | M18 mounting thread, with dual M20 side access | ||||||
3 | Measuring range: 0025...5800 mm, 1 mm step Other lengths available on request | |||||||||
4 | Certificate A - 0/1 Ex db IIC T5 Ga/Gb X, Ex ta IIIC T100 °C Da X | |||||||||
Technical specifications
OUTPUT PARAMETERS | |
Operating range, L | 25 — 5800 mm, 1 mm step |
OPERATING CONDITIONS | |
Ex marking | 0/1 Ex db IIC T5 Ga/Gb X Ex ta IIIC T100 °C Da X |
Operating temperature | from -50 to +80 °C |
Rated pressure | 350 bar, 530 bar peak |
Humidity | 90 % rel. humidity, no condensation |
Ingress protection | IP68 (40 bar for 30 minutes) |
Max. connected load | U = 24 VDC, I = 150 mA, P = 3.6 W |
MATERIALS | |
Cover | Stainless steel 08Х18Н10 / AISI 304 |
Rod | Stainless steel ASTM A269-13 / TP304l (10x1.5) |
Flange | Stainless steel 08Х18Н10 / AISI 304 |
MOUNTING | |
Mounting position | Any orientation. For horizontal installation of sensors with an operating range exceeding 1000 mm, the rod must be supported or fixed at the end |
Flange parameters | Flange thread M18х1.5 or 3/4" - 16 UNF |
Position magnet mounting | Mounting hardware and screws made of non-magnetic material |
STANDARDS | |
Cable | Must comply with IEC 60079-14-2013 |
Connector
Cable gland VVKm-N-20 | ||||
![]() | VVKm explosion-proof cable glands are designed for non-armored cable entry into hazardous area electrical equipment enclosures for indoor or outdoor installation, as well as on offshore platforms, port terminals, and in areas with explosive gas or combustible dust atmospheres. | |||
THREAD TYPE | CABLE Ø | WRENCH SIZE | TOTAL LENGTH | THREAD LENGTH |
M20 | 6-14 mm | 27 | 36 mm | 15 mm |
The number of cable glands depends on the selected housing design type.
The connection diagram depends on the interface selected on the linear position sensor.
Interchangeability
ORDER CODE | Temposonics EQUIVALENT |
MSI-HPH.0100._ _ _ _ .A | HPH-0100-_ _ _ _ -A |
MSI-HPH.0600._ _ _ _ .A | HPH-0600-_ _ _ _ -A |
MSI-HPH.0900._ _ _ _ .A | HPH-0900-_ _ _ _ -A |
MSI-HPH.1000._ _ _ _ .A | HPH-1000-_ _ _ _ -A |
MSI-HPH.1300._ _ _ _ .A | HPH-1300-_ _ _ _ -A |
_ _ _ _ measuring length (mm) | |
Downloads
Technical Documentation
Certificates
Contact a specialist





