MSI-HPH EXd High Pressure Housing (HPH)
The high-pressure housing meets the requirements for use in potentially explosive areas with MSI position sensors. This housing is designed for sensors of the MSI-H and MSI-HE series and can be used with cable or connector versions. Several construction combinations are available, with top or side mounting. Measuring length from 25 to 5800 mm, adjustable in 1 mm increments.
Price on request
Design Features
- Explosion protection marking: 0/1 Ex db IIC T5 Ga/Gb X, Ex ta IIIC T100 °C Da X
- Modular design allows for quick equipment repair without the need to relieve pressure from the hydraulic circuit.
- Designed for sensors of the MSI-H and MSI-HE series and can be used with cable or connector versions.
- Several construction combinations are available: M18 or ¾” UNF mounting flange; M20 or ½” NPT cable gland thread; long or short housing, top or side mounting.
- Measured length from 25 to 5800 mm, adjustable in 1 mm increments.
- Operating temperature up to 75 °C.
- Optional operating pressure up to 530 bar.
- Ingress protection IP68 (with cable outlet).
Compatibility
Compatible MSI sensor series | Interface | |||||
Analog | Start/Stop | SSI | CAN | Profibus | DeviceNet | |
Configurador
MSI-HPH
.
_
.
_
.
A
MSI-HPH EXd High Pressure Housing (HPH), order code:
Scope of delivery
EL SUMINISTRO INCLUYE: | |
Carcasa MSI-HPH EXd | |
Documentación (pasaporte del equipo) | |
El sensor debe pedirse por separado! | |
Product ordering code
CÓDIGO DE PEDIDO | ||||||||||
1 | 2 | 3 | 4 | |||||||
MSI-HPH | . | 0900 | . | 0 | 5 | 0 | 0 | . | A | |
1 | Serie: MSI-HPH - carcasa antideflagrante | |||||||||
2 | Tipo de diseño: | |||||||||
0100 | 0600 | 0900 | 1000 | 1300 | ||||||
![]() | ![]() | ![]() | ![]() | ![]() | ||||||
Rosca de montaje M18, con entrada de cable frontal M20 | Rosca de montaje 3/4″ UNF, con entrada de cable frontal M20 | Rosca de montaje M18, con entrada de cable lateral con rosca M20 | Rosca de montaje 3/4″ UNF, con entrada de cable lateral con rosca M20 | Rosca de montaje M18, con dos entradas de cable laterales con rosca M20 | ||||||
3 | Rango de medición: 0025...5800 paso 1 mm Otras longitudes bajo pedido | |||||||||
4 | A - 0/1 Ex db IIC T5 Ga/Gb X, Ex ta IIIC T100 °C Da X | |||||||||
Technical data
PARÁMETROS DE SALIDA | |
Rango de medición, L | 25 — 5800 mm paso 1 mm |
CONDICIONES DE FUNCIONAMIENTO | |
Marcado de protección antideflagrante | 0/1 Ex db IIC T5 Ga/Gb X Ex ta IIIC T100 °C Da X |
Rango de temperatura ambiente | de -50 a +80 °C |
Presión nominal | 350 bar, pico 530 bar |
Punto de rocío, humedad | humedad relativa del 90 % sin condensación |
Grado de protección | IP68 (40 bar durante 30 minutos) |
Carga conectada máx. | U = 24 V CC, I = 150 mA, P = 3,6 W |
MATERIAL | |
Tapa | Acero inoxidable 08Х18Н10 / AISI 304 |
Varilla | Acero inoxidable ASTM A269-13 / TP304l (10x1.5) |
Brida | Acero inoxidable 08Х18Н10 / AISI 304 |
MONTAJE | |
Posición de montaje | Cualquier posición. En instalaciones horizontales con un rango de medición superior a 1000 mm, la varilla debe apoyarse o fijarse en su extremo. |
Parámetros de la brida | Tornillo de brida M18×1,5 o 3/4" – 16 UNF |
Fijación del imán de posición | Elementos de fijación y tornillos de material no magnético |
ESTÁNDARES | |
Cable | Debe cumplir con la norma GOST IEC 60079-14-2013 |
Connector
PRENSAESTOPAS BBKm-H-20 | ||||
![]() | topas antideflagrantes BBKm están diseñados para la entrada de cables no blindados en envolventes de aparatos eléctricos con protección antideflagrante, tanto en interiores como en instalaciones exteriores. También son aptos para su uso en plataformas marinas y terminales portuarias, en áreas con riesgo de explosión y zonas con peligro de ignición por polvo combustible. | |||
TIPO DE ROSCA | Ø DEL CABLE | TAMAÑO DE LA LLAVE | LONGITUD TOTAL | LONGITUD DE ROSCA |
M20 | 6-14 mm | 27 | 36 mm | 15 mm |
The number of cable glands depends on the selected housing design type.
The connection diagram depends on the interface selected on the linear position sensor.
Interchangeability
CÓDIGO DE PEDIDO | EQUIVALENTES DE Temposonics |
MSI-HPH.0100._ _ _ _ .A | HPH-0100-_ _ _ _ -A |
MSI-HPH.0600._ _ _ _ .A | HPH-0600-_ _ _ _ -A |
MSI-HPH.0900._ _ _ _ .A | HPH-0900-_ _ _ _ -A |
MSI-HPH.1000._ _ _ _ .A | HPH-1000-_ _ _ _ -A |
MSI-HPH.1300._ _ _ _ .A | HPH-1300-_ _ _ _ -A |
_ _ _ _ longitud de medición (mm) | |
Downloads
Technical Documentation
Certificates
Contact us





