251 135-1 MTS Sensors Temposonics Programmer
The programmer allows basic SSI configuration, including zero point, gradient, measuring length, and sensor type, as well as sensor calibration.
Price on request
Available Settings
ATTENTION!
For proper operation, the device must be configured in accordance with the information specified on the sensor’s factory label.
Configurator
251 135-1
251 135-1 MTS Sensors Temposonics Programmer, order code:
Scope of Supply
THE SCOPE OF SUPPLY INCLUDES: | |
SSI interface converter box, MSI-251 135-1 (1 pc) | |
Cable (60 cm) with straight M16 connector (female, 7-pin) – straight D-sub connector (female, 9-pin) (1 pc) | |
Cable (60 cm) with 6 terminal clamps – straight D-sub connector (female, 9-pin) (1 pc) | |
USB cable (1 pc) | |
Power supply unit (1 pc) | |
Order Code
ORDER CODE | ||
1 | ||
251 135-1 | ||
1 | Series: 251 135-1 - programmer for linear position sensors with SSI output | |
Technical Specifications
GENERAL INFORMATION | |
Housing dimensions | 45 х 24 х 70 mm (W × H × L) |
Housing material | ABS |
Operating voltage | +24 VDC (- 15 / +20 %) |
Output voltage | +24 VDC (max. 750 mA) when using original power supply GTS18A24-P1J |
Operating temperature | 0 ... +75° С |
Ingress protection | Housing: IP40 Terminals: IP20 |
Weight | |
Interface | SSI |
SSI SETTINGS | |
Data length configuration | Yes |
Data format configuration | Yes |
Resolution configuration | Yes |
Measuring direction configuration | Yes |
Transmission mode configuration | Yes |
ADDITIONAL SETTINGS | |
Zero point configuration | Yes |
Linearization configuration | Yes |
Factory reset | Yes |
ADDITIONAL FEATURES | |
Status diagnostics | LEDs on the programmer housing |
Device Description
251 135-1 is a programmer for configuring and calibrating 4th generation Temposonics linear position sensors equipped with the SSI interface. Designed for industrial automation systems, the device provides precise and flexible sensor parameterization to meet specific application requirements.
Using the proprietary software, the programmer enables both basic and advanced settings: SSI interface configuration, zero point setting, gradient and measuring range adjustment, sensor type selection, and sensor calibration.
The programmer ensures reliable operation with 4th generation Temposonics sensors, simplifying commissioning and subsequent equipment maintenance.
Downloads
Contact a specialist
Configurator
Navigation
Programming and Service Tools 
